Product Index
Page: 1 2 3 4

EA-TPA-H3-0   Header pipe (Aluminum), Turns 90 degrees forward and then turns 180 degrees to rear, 0" offset, 7/8" diameter
EA-TPA-H3-3   Header pipe (Aluminum), Turns 90 degrees forward and then turns 180 degrees to rear, 3" offset, 7/8" diameter
EA-TPA-H2L   Header pipe (Aluminum), Turns 90 degrees to rear, long radius, 7/8" diameter, use with O-ring style manifold
EA-TPA-H2S   Header pipe (Aluminum), Turns 90 degrees to rear, short radius, 7/8" diameter, use with O-ring style manifold
BS-CR2-56   #2-56 control rod, 12" long, .072 diameter, threaded one end
BS-C R4-40   #4-40 control rod, 12" long, .093 diameter, threaded one end
CA10-8   1.0" Long Control Arm for 1/4" diameter shaft
CA10-6   1.0" Long Control Arm for 3/16" diameter shaft
BS-DRIV-1501   1.5" bust driver, finished, 1/12th scale
BS-DRIV-1500   1.5" bust driver, raw kit form (requires painting), 1/12th scale
CA15-8   1.5" Long Control Arm for 1/4" diameter shaft
CA15-6   1.5" Long Control Arm for 3/16" diameter shaft
PSL8   1/4" Diameter, 4 5/8" long x 1 3/8" Brg. Length, hardened steel, with ground flats for set screws
PSL8-8K   1/4" Diameter, 4 5/8" long x 1 3/8" Brg. Length, with flex ferrule (1/4"), drive dog & streamlined tail piece
PSF8   1/4" Diameter, 5 1/4" long x 2" Brg. Length, hardened steel, with ground flats for set screws
PSF8-8K   1/4" Diameter, 5 1/4" long x 2" Brg. Length, with flex ferrule (1/4"), drive dog & streamlined tail piece
FCW8-18   1/4" Flex Cable, 18" long, welded to 1/4" x 3 1/2" long prop shaft SS, with 1/4"-28 thread
FCW8-30   1/4" Flex Cable, 30" long, welded to 1/4" x 3 1/2" long prop shaft SS, with 1/4"-28 thread
RAS304   1AR Straight Rudder Assy 3 1/4" long
RAS304-BIL   1AR Straight Rudder Assy 3 1/4" long, with bilge
RAS304-BWP   1AR Straight Rudder Assy 3 1/4" long, with bottom water pickup
RAS304-SWP   1AR Straight Rudder Assy 3 1/4" long, with side water pickup
RBS304-BIL   1ARB, Straight Rudder Blade with bilge, 3 1/4" long (.21 size)
RBS304   1ARB, Straight Rudder Blade, 3 1/4" long (.21 size)
RBS304-BWP   1ARB, Straight Rudder Blade, 3 1/4" long (.21 size)
RBS304-SWP   1ARB, Straight Rudder Blade, 3 1/4" long (.21 size)
MP1213   1MP Mounting plate
PR-BRX470   2 Blade Beryillium Copper, 2.76"diameter x 3.86" pitch (1/4" I.D.)
PR-BRX472   2 Blade Beryillium Copper, 2.84"diameter x 3.98" pitch (1/4" I.D.)
PR-BRX572   2 Blade Beryillium Copper, 2.84"diameter x 4.26" pitch (1/4" I.D.)
PR-BRX482   2 Blade Beryillium Copper, 3.22"diameter x 4.51" pitch (1/4" I.D.)
PR-SS15   2 Blade, 17-4PH Stainless Steel, 1.60" diameter, 2.5" pitch (3/16" I.D.)
PR-SS20   2 Blade, 17-4PH Stainless Steel, 1.72" diameter, 2.6" pitch (3/16" I.D.)
PR-SS25   2 Blade, 17-4PH Stainless Steel, 1.84" diameter, 2.8" pitch (3/16" I.D.)
PR-SS30   2 Blade, 17-4PH Stainless Steel, 1.90" diameter, 3.0" pitch (3/16" I.D.)
PR-SS35   2 Blade, 17-4PH Stainless Steel, 2.00" diameter, 3.2" pitch (3/16" I.D.)
PR-SS40   2 Blade, 17-4PH Stainless Steel, 2.12" diameter, 3.3" pitch (3/16" I.D.)
PR-SS45   2 Blade, 17-4PH Stainless Steel, 2.25" diameter, 3.5" pitch (3/16" I.D.)
PR-SS50   2 Blade, 17-4PH Stainless Steel, 2.30" diameter, 3.6" pitch (3/16" I.D.)
PR-SS55   2 Blade, 17-4PH Stainless Steel, 2.40" diameter, 3.8" pitch (3/16" I.D.)
PR-SS60   2 Blade, 17-4PH Stainless Steel, 2.52" diameter, 3.9" pitch (3/16" I.D.)
PR-SS65   2 Blade, 17-4PH Stainless Steel, 2.61" diameter, 4.0" pitch (3/16" I.D.)
PR-SS70   2 Blade, 17-4PH Stainless Steel, 2.74" diameter, 4.2" pitch (3/16" or 1/4" I.D.)
PR-SS75   2 Blade, 17-4PH Stainless Steel, 2.95" diameter, 4.3" pitch (3/16" or 1/4" I.D.)
PR-SS80   2 Blade, 17-4PH Stainless Steel, 3.10" diameter, 4.5" pitch (3/16" or 1/4" I.D.)
BS-DRIV-2001   2" bust driver, finished, 1/10 - 1/8th scale
BS-DRIV-3001   2" bust driver, finished, 1/8 - 1/7th scale
BS-DRIV-2000   2" bust driver, raw kit form (requires painting), 1/10 - 1/8th scale
MP1214   2/3 MP Mounting plate
HU-A29PO   29" Popeye - Offshore Cat, Aeromarine
HU-A29SP   29" Sprint Cat with classic or turbine cowling, Aeromarine
RATF410   2AR Tapered Rudder Assy 4 5/8" long
RATF410-SWP   2AR Tapered Rudder Assy 4 5/8" long, with side water pickup
RBTF410-SWP   2ARB, Tapered Rudder Blade with side water pickup, 4 5/8" long (.40 size)
RBTF410   2ARB, Tapered Rudder Blade, 4 5/8" long (.40 size)
PR-BRV967/3   3 Blade Beryillium Copper, 2.64"diameter x 5.02" pitch (1/4" I.D.)
PR-BRX470/3   3 Blade Beryillium Copper, 2.76"diameter x 3.86" pitch (1/4" I.D.)
BS-DRIV-3000   3" bust driver, raw kit form (requires painting), 1/8 - 1/7th scale
BS-DRIV-3051   3" driver, custom finished/assembled, includes cloth shirt & life jacket, 1/8 to 1/7th scale
BS-DRIV-3050   3" driver, raw kit form, includes cloth shirt & life jacket (requires painting & ass'y), 1/8 to 1/7th scale
BS-DRIV-3501   3.5" driver, custom finished/assembled, includes cloth shirt & life jacket, 1/8 to 1/7th scale
BS-DRIV-3500   3.5" driver, raw kit form, includes cloth shirt & life jacket (requires painting & ass'y), 1/8 to 1/7th scale
FCA1068-12   3/16" Cable, 12" long, with #1068 (3/16" x 7/32" x 2 15/16" long prop shaft)
FCA1069-12   3/16" Cable, 12" long, with #1069 (3/16" x 7/32" x 3 9/16" long prop shaft)
FCA1068-18   3/16" Cable, 18" long, with #1068 (3/16" x 7/32" x 2 15/16" long prop shaft)
FCA1069-18   3/16" Cable, 18" long, with #1069 (3/16" x 7/32" x 3 9/16" long prop shaft)
FCA1068-24   3/16" Cable, 24" long, with #1068 (3/16" x 7/32" x 2 15/16" long prop shaft)
FCA1069-24   3/16" Cable, 24" long, with #1069 (3/16" x 7/32" x 3 9/16" long prop shaft)
PS1062   3/16" Diameter, 2 1/2" long, Bored for 5/32" diameter cable, thread #10-32 x 1/2" (Stainless steel)
PS1060   3/16" Diameter, 2 1/2" long, thread #10-32 x 1/2" (Stainless steel)
PS1066   3/16" Diameter, 2 1/2" long, with drive pin & bored for 5/32" cable, thread #10-32 x 1/2" (Stainless steel)
PS1064   3/16" Diameter, 2 1/2" long, with drive pin, thread #10-32 x 1/2" (Stainless steel)
PS1056   3/16" Diameter, 22" long, precision ground, no threads, (Stainless steel)
PS1057   3/16" Diameter, 22" long, thread #10-32 x 1/2" (Stainless steel)
PS1063   3/16" Diameter, 3 1/8" long, Bored for 5/32" diameter cable, thread #10-32 x 1/2" (Stainless steel)
PS1061   3/16" Diameter, 3 1/8" long, thread #10-32 x 1/2" (Stainless steel)
PS1067   3/16" Diameter, 3 1/8" long, with drive pin & bored for 5/32" cable, thread #10-32 x 1/2" (Stainless steel)
PS1065   3/16" Diameter, 3 1/8" long, with drive pin, thread #10-32 x 1/2" (Stainless steel)
PS1069   3/16" Diameter, 3 9/16" long, Bored for 3/16" diameter cable, thread #10-32 x 1/2" (Stainless steel)
PS1070   3/16" Diameter, 4 1/16" long, thread #10-32 x 1/2" (Stainless steel)
PSL6   3/16" Diameter, 4 5/8" long x 1 3/8" Brg. Length, hardened steel, with ground flats for set screws
PSL6-8K   3/16" Diameter, 4 5/8" long x 1 3/8" Brg. Length, with flex ferrule (1/4"), drive dog & streamlined tail piece
PSL6-6K   3/16" Diameter, 4 5/8" long x 1 3/8" Brg. Length, with flex ferrule (3/16"), drive dog & streamlined tail piece
PSF6   3/16" Diameter, 5 1/4" long x 2" Brg. Length, hardened steel, with ground flats for set screws
PSF6-8K   3/16" Diameter, 5 1/4" long x 2" Brg. Length, with flex ferrule (1/4"), drive dog & streamlined tail piece
PSF6-6K   3/16" Diameter, 5 1/4" long x 2" Brg. Length, with flex ferrule (3/16"), drive dog & streamlined tail piece
FCW6-12   3/16" Flex Cable, 12" long, welded to 3/16" x 3 1/8" long prop shaft SS, with #10-32 thread
FCW6-24   3/16" Flex Cable, 24" long, welded to 3/16" x 3 1/8" long prop shaft SS, with #10-32 thread
PS1068   3/16" x 7/32" Diameter, 2 15/16" long, Bored for 3/16" diameter cable, thread #10-32 x 1/2" (Stainless steel)
HU-A30PR   30" Predator - Outboard tunnel hull, Aeromarine
HU-A31CH   31" Challenger - Deep Vee/Mono, Aeromarine
HU-A32SC   32" Scorpion - Deep Vee/Mono, Aeromarine
HU-A32SH   32" Stinger - Outrigger Hydros, (White only), Aeromarine
HU-A33PR   33" Predator - Outboard tunnel hull, Aeromarine
HU-A33HS   33" Sport - 7 liter, (white only) - Hydro, Aeromarine
HU-A35SP   35" Sprint Cat with classic or turbine cowling, Aeromarine
HU-A35SH   35" Stinger - Outrigger Hydros, (White only), Aeromarine
HU-A36SC   36" Scorpion - Deep Vee/Mono, Aeromarine
HU-A36OC   36" Team Believer - Offshore Cat, Aeromarine
HU-A37HS   37" Sport - Bud or 7-11 - Hydro, Aeromarine
RATF502   3AR Tapered Rudder Assy 5 1/8" long
RATF502-SWP   3AR Tapered Rudder Assy 5 1/8" long, with side water pickup
RBTF502-SWP   3ARB, Tapered Rudder Blade with side water pickup, 5 1/8" long (.60 size)
RBTF502   3ARB, Tapered Rudder Blade, 5 1/8" long (.60 size)
MMF421   4" Rails, F/.21 motor, 1 3/16" opening
MMF440   4" Rails, F/.40 motor, 1 5/16" opening
HU-A42OC   42" Popeye, Team USA, Conquest, or Sunkist - Offshore Cat, Aeromarine
HU-A42SP   42" Sprint Cat with classic, turbine or competition cowling, Aeromarine
HU-A43HS   43" 1/8 scale unlimited - Bud or Miller American - Hydro, Aeromarine
HU-A43CH   43" Challenger - Deep Vee/Mono, Aeromarine
HU-A44SH   44" Stinger - Outrigger Hydros, (White only), Aeromarine
HU-A45SA   45" Sabre Canard, Aeromarine
HU-A48CH   48" Challenger - Deep Vee/Mono, Aeromarine
MMF540   5" Rails, F/.40 motor, 1 5/16" opening
MMF560   5" Rails, F/.60 motor, 1 3/4" opening
FCA1062-12   5/32" Cable, 12" long, with #1062 (3/16" x 2 1/2" prop shaft)
FCA1063-12   5/32" Cable, 12" long, with #1063 (3/16" x 3 1/8" prop shaft)
FCA1066-12   5/32" Cable, 12" long, with #1066 (3/16" x 2 1/2" prop shaft)
FCA1067-12   5/32" Cable, 12" long, with #1067 (3/16" x 3 1/8" prop shaft)
FCA1062-18   5/32" Cable, 18" long, with #1062 (3/16" x 2 1/2" prop shaft)
FCA1063-18   5/32" Cable, 18" long, with #1063 (3/16" x 3 1/8" prop shaft)
FCA1066-18   5/32" Cable, 18" long, with #1066 (3/16" x 2 1/2" prop shaft)
FCA1067-18   5/32" Cable, 18" long, with #1067 (3/16" x 3 1/8" prop shaft)
FCA1062-24   5/32" Cable, 24" long, with #1062 (3/16" x 2 1/2" prop shaft)
FCA1063-24   5/32" Cable, 24" long, with #1063 (3/16" x 3 1/8" prop shaft)
FCA1066-24   5/32" Cable, 24" long, with #1066 (3/16" x 2 1/2" prop shaft)
FCA1067-24   5/32" Cable, 24" long, with #1067 (3/16" x 3 1/8" prop shaft)
HU-A50AP   50" Apache - Deep Vee/Mono, Aeromarine
HU-A50OC   50" Popeye or Pro Cat - Offshore Cat, Aeromarine
HU-A50SHOV   50" Shovel Nose, Drop Sponson Hydro, Aeromarine
HU-A50HX   50" Sport X - Bud or 7-11 - Hydro, Aeromarine
HU-A56AP   56" Apache - Deep Vee/Mono, Aeromarine
HU-A57SI   57" Signature - Deep Vee/Mono, Aeromarine
HU-84AP   84" Apache - Deep Vee/Mono, Aeromarine (Shipping is extra)
EA-Z23-P01-1   Air cooled cylinder, factory modified (2.25 horsepower), for Zenoah G-23 or G-2D
EA-Z23-P01-S   Air cooled cylinder, stock (1.2 horsepower), for Zenoah G-23 or G-2D
EA-ZLH-P01-S   Air cooled cylinder, stock (1.2 horsepower), for Zenoah LH
EA-Z23-P01   Air cooled cylinder, stock (2 horsepower), for Zenoah G-23 or G-2D
EA-Z42-P01   Air cooled cylinder, stock, for Zenoah G-42
EA-Z26-P11-WR   AL. water cooled intake manifold for J&G 22.5cc or 25.6cc top end, for rotary barrel style carburetor
HU-OTHER   All other models available, Call for details - Dumas, Prather, Aeromarine and others
MMIB   Assy.-QC Master Mount W/1212 Mounting Plates
MMI-4060A   Assy.-QC Quick Change Mt. 5" W/.40 & .60 Inserts, 1 5/16" & 1 3/4" opening
MMI-40A   Assy.-QC Quick Change Mt. 5" W/.40 Insert, 1 5/16" opening
MMI-60A   Assy.-QC Quick Change Mt. 5" W/.60 Insert, 1 3/4" opening
BS-AB   Auto bailer (qty 1)
B-6201-P   Ball bearing, premium quality, 6201 for clutch drum (qty 1)
B-6201-S   Ball bearing, standard quality, 6201 for clutch drum (qty 1)
EA-Z23-P08   Base gasket, for Zenoah G-23 or G-2D
EA-Z42-P08   Base gasket, for Zenoah G-42
EA-ZLH-P08   Base gasket, for Zenoah LH
RS-BC   Battery connector mates to 7.2 volt battery pack
RS-BP72-15   Battery pack, 7.2 volt, 1,500 mAhr
RS-BP72-15K   Battery pack, 7.2 volt, 1,500 mAhr battery and 4 hour wall charger
VINYL COLORS-2   BB-blueberry, YL-yellow, FO-fluorescent orange, FP-fluorescent pink
Note-B1   Bearing Options: 6S (3/16" sleeve), 6F (3/16" Flange), 7S (7/32" Sleeve), 8S (1/4" Sleeve), 8F (1/4" Flange add $5.00)
EA-CS12   Big bore carburetor snozzler 3/4" bore, Fits all Walbro carburetors
EA-WALC67   Big bore carburetor, Walbro 167, 28 Ventury, internal plus, primer bulb, stock Zenoah G-23
EA-WALC01   Big bore carburetor, Walbro, 28 Ventury, internal plus, SP arm
EA-WALC02   Big bore carburetor, Walbro, 28 Ventury, performance metering, external pulse, SP arm
EA-WALC03   Big bore carburetor, Walbro, 32 Ventury, performance metering, internal pulse
EA-WALC04   Big bore carburetor, Walbro, 34 Ventury, with accelerator pump, performance metering, internal pulse
EA-H25-PPCK30   Big bore pro power f/25cc Homelite, 30cc w/C cylinder, piston, rings, rod, straight pull, big bore carburetor, throttle linkage
H-NB-3   Brass hex nut, small profile, #10-32 (qty 2)
DH-BN10-8   Bullet Nose Mates 7/16" OD x 5/16" ID full range strut to 1/4" OD stuffing tube, 1/4" ID Min, (Brass)
DH-BN10-10   Bullet Nose Mates 7/16" OD x 5/16" ID full range strut to 5/16" OD stuffing tube, 1/4" ID Min, (Brass)
DH-BN10-9   Bullet Nose Mates 7/16" OD x 5/16" ID full range strut to 9/32" OD stuffing tube, 1/4" ID Min, (Brass)
DH-FF6-6-14CS   Cable Ferrule for 3/16" prop shaft to 3/16" flex cable (steel) (7/16" O.D.)
EA-Z23-P55   Canister muffler for Zenoah G-23 or G-2D
EA-Z23-P55-K   Canister muffler kit for Zenoah G-23
EA-Z23-P42   Cap for spark plug, red silicon, for Zenoah G-23 and other
EA-WAL-K10WAT   Carburetor complete rebuild kit for Walbro butterfly style carburetors (WA or WT)
EA-WAL-K20WYK   Carburetor complete rebuild kit for Walbro rotary barrel style carburetors (WYK)
EA-WAL-K10WY   Carburetor complete rebuild kit for Walbro small rotary barrel style carburetors (WY)
EA-WALC-SPCK   Carburetor conversion kit for G-23 straight pull: Ext. pulse plate, throttle shaft, swivel, throttle linkage
EA-WAL-D10WAT   Carburetor diaphragms & gaskets rebuild kit for Walbro butterfly style carburetors (WA or WT)
EA-WAL-D20WYK   Carburetor diaphragms & gaskets rebuild kit for Walbro rotary barrel style carburetors (WYK)
EA-WAL-D10WY   Carburetor diaphragms & gaskets rebuild kit for Walbro small rotary barrel style carburetors (WY)
EA-Z23-P12   Carburetor gasket, for Walbro butterfly style carburetors
EA-Z42-P12   Carburetor gasket, for Walbro WYK rotary barrel style carburetors
EA-Z42-P16   Case gasket for Zenoah G-42
EA-Z23-P22   Case screws, 5-.80 x 30mm long, for Zenoah G-23, G-2D or LH, (qty 4)
EA-QDCL1   Centrifugal clutch for Quickdraw engines, requires engine with tapered crankshaft and clutch style seal plate. Factory installed with purchase of engine.
EA-Z23-P26   Cir clips to retain 8mm wrist pin, for Zenoah G-23, G-2D or LH and 25.6cc, (qty 2)
EA-Z42-P26   Cir clips to retain wrist pin, for Zenoah G-42, (qty 2)
WPCA   Clamping Water Pickup Assembly
BS-RB-LID   Clear Lexan lid, fits radio boxes 01, 02, 03 and 04
EA-Z23CL1   Clutch for Zenoah G-23, requires 1/8" spacing from motor on all 4 lugs
EA-Z23CL2   Clutch for Zenoah G-23, with purchase of engine
EA-Z42CL1   Clutch for Zenoah G-42, for use with Marine Specilties mounts
EA-Z42CL2   Clutch for Zenoah G-42, with purchase of engine
EC-COL-Z23A   Collet for Zenoah G-23 Compact x 1/4" round cable
HU-COLOR   Colored gelcoat - Yellow, Red or Black (not available on all models)
EA-WAL-K10WIP   Complete rebuild kit for Walbro water pump
EA-Z23-P13-A   Crankcase assembly for Zenoah G-23, complete with bearings, seals, bolts and gaskets.
EA-Z42-P13   Crankcase assembly for Zenoah G-42, complete with bearings, seals, bolts and gaskets.
EA-Z23-P13   Crankcase for Zenoah G-23, with bolts
EA-Z23-P16   Crankcase gasket for Zenoah G-23 or G-2D
EA-ZLH-P16   Crankcase gasket for Zenoah LH
EA-Z23-P29   Crankshaft (solid pin), for Zenoah G-23 or 25.6cc, (for 8mm wrist pin)

Page: 1 2 3 4