Marine Specialties Price List January 2000

INDEX
Page Prefix Description
16 B Bearings, Bushings and Thrust Washers
5 BR Brackets
14 BS Building Supplies: Radio Boxes, Push Rods, Fuel Tanks & Lines, Trim Tabs, Drivers, etc.
4 CA Control Arms
7 DH Drive Hardware: Ferrules, Drive Dogs, Bullet Noses & Streamlined Tail Pieces
9 EA Engine Accessories, Parts, Modifications, Tuned Pipes, Tachs, Water Pumps, Etc.
7 EC Engine Couplers: Square Drive, Super Flywheel Nuts, Collets
6 FC Flex Cables
6 FCA Flex Cable Assemblies with Prop Shafts
6 FCW Flex Cables Welded to Prop Shafts
14 FG Fiberglass
14 FS Field Supplies
8 GE Gasoline Engines
16 H Hardware - Fasteners, Nuts, Screws, Washers
2 HBR HBR Outdrives and Accessories
17 HK Hardware Kits
13 HU Boat Hulls
4 MM Motor Mounts
5 MP Mounting and Retainer Plates
17 MS Marine Specialties Logos, Stickers and Attire
17 PP Pivot Pins
8 PR Propellers
6 PS Propeller and Stub Shafts
3 RA Rudder Assemblies and Accessories
3 RB Rudder Blades
15 RS Radio Supplies
2 SA Strut Assemblies
2 SB Strut Blades, Fixed Parallel & Angle Struts
17 SK Special Kits
5 SL Shaft Log
5 ST Stuffing Tube
4 TF Turn Fins, Double Skegs
2 VOA VOA Outdrive
4 W Water Pickups, Outlets and Fittings
NEW PART NUMBER OLD PART NUMBER DESCRIPTION RETAIL PRICE
         
OUTDRIVE & STRUT ASSEMBLIES WITH MOUNTING BRACKETS AND SS HARDWARE
SAMR-6S 1029 Mid Range Strut and T-Bracket, with 3/16" Sleeve Bearings   17.75
         
SAFR-6F   Full Range Strut and T-Bracket, with 3/16" T-Flange Bearings   19.75
SAFR-6S   Full Range Strut and T-Bracket, with 3/16" Sleeve Bearings   19.75
SAFR-7S   Full Range Strut and T-Bracket, with 7/32" Sleeve Bearings   19.75
SAFR-8F   Full Range Strut and T-Bracket, with 1/4" T-Flange Bearings   23.75
SAFR-8S   Full Range Strut and T-Bracket, with 1/4" Sleeve Bearings   19.75
         
HBRTF1410-_ _ 1030 HBR Outdrive, Top Pull, with One 4 5/8" Long Fixed Rudder (.40 Size) see note B1, W1   52.75
HBRTF1502-_ _ 1031 HBR Outdrive, Top Pull, with One 5 1/8" Long Fixed Rudder (.60 Size) see note B1, W1   52.75
HBRTF2410-_ _ 1032 HBR Outdrive, Top Pull, with Two 4 5/8" Long Fixed Rudders (.40 Size) see note B1, W1   69.75
HBRTF2502-_ _ 1033 HBR Outdrive, Top Pull, with Two 5 1/8" Long Fixed Rudders (.60 Size) see note B1, W1   69.75
HBRTS1410-_ _ 1034 HBR Outdrive, Top Pull, w/One 4 5/8" Long Safety Shear Rudder (.40 Size) note B1, W2   52.75
HBRTS1502-_ _ 1035 HBR Outdrive, Top Pull, w/One 5 1/8" Long Safety Shear Rudder (.60 Size) note B1, W2   52.75
HBRTS2410-_ _ 1036 HBR Outdrive, Top Pull, w/Two 4 5/8" Long Safety Shear Rudders (.40 Size) note B1, W2   69.75
HBRTS2502-_ _ 1037 HBR Outdrive, Top Pull, w/Two 5 1/8" Long Safety Shear Rudders (.60 Size) note B1, W2   69.75
         
HBRCF1410-_ _   HBR Outdrive, Centerpull, with One 4 5/8" Long Fixed Rudder (.40 Size) see note B1, W1   62.75
HBRCF1502-_ _   HBR Outdrive, Centerpull, with One 5 1/8" Long Fixed Rudder (.60 Size) see note B1, W1   62.75
HBRCF2410-_ _   HBR Outdrive, Centerpull, with Two 4 5/8" Long Fixed Rudders (.40 Size) see note B1, W1   79.75
HBRCF2502-_ _   HBR Outdrive, Centerpull, with Two 5 1/8" Long Fixed Rudders (.60 Size) see note B1, W1   79.75
HBRCS1410-_ _   HBR Outdrive, Centerpull, w/One 4 5/8" Long Safety Shear Rudder (.40 Size) note B1, W2   67.75
HBRCS1502-_ _   HBR Outdrive, Centerpull, w/One 5 1/8" Long Safety Shear Rudder (.60 Size) note B1, W2   67.75
HBRCS2410-_ _   HBR Outdrive, Centerpull, w/Two 4 5/8" Long Safety Shear Rudders (.40 Size) note B1, W2   84.75
HBRCS2502-_ _   HBR Outdrive, Centerpull, w/Two 5 1/8" Long Safety Shear Rudders (.60 Size) note B1, W2   84.75
Note B1- Bearing Options: -6S (3/16" Sleeve), -6F (3/16" Flange), -7S (7/32" Sleeve), -8S (1/4" Sleeve), -8F (1/4" Flange add $5.00)  
Note W1- Water Pickup Options: -SWP (Side Water Pickup) add $10 each rudder  
Note W2- Water Pickup/Bilge Options: -SWP (Side Water Pickup), -BWP (Bottom Water Pickup), -BIL (Bilge) add $10 each rudder  
HBR-SOB200 SOB200 HBR Stand Off Bracket, 2" Long, Straight   19.75
HBR-SOB200-2U   HBR Stand Off Bracket, 2" Long, Angled 2 Degrees Up From Transom   24.75
HBR-SOB200-5U   HBR Stand Off Bracket, 2" Long, Angled 5 Degrees Up From Transom   24.75
HBR-SOB250   HBR Stand Off Bracket, 2.5" Long, Straight   24.75
HBR-SOB300   HBR Stand Off Bracket, 3" Long, Straight   24.75
HBR-SOB400   HBR Stand Off Bracket, 4" Long, Straight   29.75
HBR-TSK   HBR Steering Kit, Titanium Tie Rod, Marine Ball Joint Rod Ends and Stainless Steel Hardware   19.75
         
VOA304MP 1038 VOA-19M Variable Outdrive Assy, 3 1/4" Long Rudder (.21 Size Mono)   34.75
VOA304HP 1039 VOA-19H Variable Outdrive Assy, 3 1/4" Long Rudder (.21 Size Hydro)   34.75
         
VOA312MP 1040 VOA-40M Variable Outdrive Assy, 3 3/4" Long Rudder (.40 Size Mono)   34.75
VOA312HP 1041 VOA-40H Variable Outdrive Assy, 3 3/4" Long Rudder (.40 Size Hydro)   34.75
         
STRUT BLADES, FIXED PARALLEL & ANGLE STRUTS
SBMR-6S 1243 Mid Range Strut, with 3/16" Sleeve bearings   12.75
SBFR-_ _ 1238 Full Range Strut, with bearings, See Note B1   13.75
Note B1- Bearing Options: -6S (3/16" Sleeve), -6F (3/16" Flange), -7S (7/32" Sleeve), -8S (1/4" Sleeve), -8F (1/4" Flange add $5.00)  
SBHP-6S 1237 VOA Hydroplane Strut, with 3/16" Sleeve bearings   10.75
SBMP-6S 1236 VOA Monoplane Strut, with 3/16" Sleeve bearings   10.75
         
SBA100-6S 1242 7.5o angle, 1" drop, with 3/16" Sleeve bearings   8.50
SBA103-6F   7.5o angle, 1 3/16" drop, with 3/16" Flange bearings   12.75
SBA103-6S 1240 7.5o angle, 1 3/16" drop, with 3/16" Sleeve bearings   10.75
SBA103-8F   7.5o angle, 1 3/16" drop, with 1/4" Flange bearings   15.75
         
SBP100-6S 1239 Parallel, 1" drop, with 3/16" Sleeve bearings   8.50
SBP106-6F   Parallel, 1 3/8" drop, with 3/16" Flange bearings   12.75
SBP106-6S 1241 Parallel, 1 3/8" drop, with 3/16" Sleeve bearings   10.75
SBP106-8F   Parallel, 1 3/8" drop, with 1/4" Flange bearings   15.75
         
RUDDER ASSEMBLIES WITH MOUNTING BRACKETS AND SS HARDWARE
RAS304 1020 1AR Straight Rudder Assy. 3 1/4" Long   14.75
RAS304-BIL   1AR Straight Rudder Assy. 3 1/4" Long, with Bilge   22.75
RAS304-BWP   1AR Straight Rudder Assy. 3 1/4" Long, with Bottom Water Pickup   22.75
RAS304-SWP   1AR Straight Rudder Assy. 3 1/4" Long, with Side Water Pickup   22.75
         
RATF410 1021 2AR Tapered Rudder Assy. 4 5/8" Long   19.75
RATF410-SWP 1027 2AR Tapered Rudder Assy. 4 5/8" Long, with Side Water Pickup   27.75
RATF502 1022 3AR Tapered Rudder Assy. 5 1/8" Long   19.75
RATF502-SWP 1028 3AR Tapered Rudder Assy. 5 1/8" Long, with Side Water Pickup   27.75
         
RATS410 1023 Safety Shear Tapered Rudder Assy. 4 5/8" Long   23.75
RATS410-BIL   Safety Shear Tapered Rudder Assy. 4 5/8" Long, with Bilge   33.75
RATS410-BWP   Safety Shear Tapered Rudder Assy. 4 5/8" Long, with Bottom Water Pickup   33.75
RATS410-SWP   Safety Shear Tapered Rudder Assy. 4 5/8" Long, with Side Water Pickup   33.75
RATS502 1024 Safety Shear Tapered Rudder Assy. 5 1/8" Long   23.75
RATS502-BIL   Safety Shear Tapered Rudder Assy. 5 1/8" Long, with Bilge   33.75
RATS502-BWP   Safety Shear Tapered Rudder Assy. 5 1/8" Long, with Bottom Water Pickup   33.75
RATS502-SWP   Safety Shear Tapered Rudder Assy. 5 1/8" Long, with Side Water Pickup   33.75
         
RATSC410   Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" Long   28.75
RATSC410-BIL   Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" Long, with Bilge   38.75
RATSC410-BWP   Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" Long, with Bottom Water Pickup   38.75
RATSC410-SWP   Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" Long, with Side Water Pickup   38.75
RATSC502   Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" Long   28.75
RATSC502-BIL   Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" Long, with Bilge   38.75
RATSC502-BWP   Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" Long, with Bottom Water Pickup   38.75
RATSC502-SWP   Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" Long, with Side Water Pickup   38.75
         
RUDDER ACCESSORIES
RA-SPIN 1026 Shear Pins for Safety Shear Rudder (Qty. 6) 2.50
RA-TORS 1025 Torsion Spring for Safety Shear Rudder (Stainless Steel)   3.50
         
RUDDER BLADES
RBS304 1225 1ARB, Straight Rudder Blade, 3 1/4" Long (.21 size)   8.50
RBS304-BIL   1ARB, Straight Rudder Blade with Bilge, 3 1/4" Long (.21 size)   17.75
RBS304-BWP   1ARB, Straight Rudder Blade with Bottom Water Pickup, 3 1/4" Long (.21 size)   17.75
RBS304-SWP   1ARB, Straight Rudder Blade with Side Water Pickup, 3 1/4" Long (.21 size)   17.75
         
RBT304 1230 VOA-1RB, Rudder Blade, 3 1/4" Long, (.21 size)   9.50
RBT312 1231 VOA-2RB, Rudder Blade, 3 3/4" Long, (.40 size)   9.50
RBTF410 1226 2ARB, Tapered Rudder Blade, 4 5/8" Long, (.40 size)   13.75
RBTF410-SWP 1232 2ARB, Tapered Rudder Blade with Side Water Pickup, 4 5/8" Long, (.40 size)   23.75
RBTF502 1227 3ARB, Tapered Rudder Blade, 5 1/8" Long, (.60 size)   13.75
RBTF502-SWP 1233 3ARB, Tapered Rudder Blade with Side Water Pickup, 5 1/8" Long, (.60 size)   23.75
         
RBTS410 1228 Safety Shear Rudder, 4 5/8" Long, (.40 size), assy. with head   15.75
RBTS410-BIL   Safety Shear Rudder with Bilge, 4 5/8" Long, (.40 size), assy. with head   24.75
RBTS410-BWP   Safety Shear Rudder with Bottom Water Pickup, 4 5/8" Long, (.40 size), assy. w/head   24.75
RBTS410-SWP   Safety Shear Rudder with Side Water Pickup, 4 5/8" Long, (.40 size), assy. with head   24.75
RBTS502 1229 Safety Shear Rudder, 5 1/8" Long, (.60 size), assy. with head   15.75
RBTS502-BIL 1229BIL Safety Shear Rudder, with Bilge, 5 1/8" Long, (.60 size), assy. with head   24.75
RBTS502-BWP 1229BWP Safety Shear Rudder, with Bottom Water Pickup, 5 1/8" Long, (.60 size), assy. w/head   24.75
RBTS502-SWP 1229SWP Safety Shear Rudder, with Side Water Pickup, 5 1/8" Long, (.60 size), assy. with head   24.75
         
RBTSC410   Safety Shear Rudder, Centerpull, 4 5/8" Long, (.40 size), assy. with Head & Arm   25.75
RBTSC410-BIL   Safety Shear Rudder, Centerpull, with Bilge, 4 5/8" Long, (.40 size), assy. with head & Arm   34.75
RBTSC410-BWP   Safety Shear Rudder, Centerpull, w/Bottom Water Pickup, 4 5/8" Lg, assy. w/head & Arm   34.75
RBTSC410-SWP   Safety Shear Rudder, Centerpull, w/Side Water Pickup, 4 5/8" Long, assy. w/head & Arm   34.75
RBTSC502   Safety Shear Rudder, Centerpull, 5 1/8" Long, (.60 size), assy. with head & Arm   25.75
RBTSC502-BIL   Safety Shear Rudder, Centerpull, with Bilge, 5 1/8" Long, (.60 size), assy. with head & Arm   34.75
RBTSC502-BWP   Safety Shear Rudder, Centerpull, w/Bottom Water Pickup, 5 1/8" Long, assy. w/head & Arm   34.75
RBTSC502-SWP   Safety Shear Rudder, Centerpull, w/Side Water Pickup, 5 1/8" Long, assy. w/head & Arm   34.75
         
WATER PICKUPS, OUTLETS AND FITTINGS
WF0832   Water Fitting, #8-32 Thread, 3/8" Long, (Brass) (Qty.2) 2.50
WF1032L 1290 Water Fitting Long, #10-32 Thread, 1/2" Long, (Brass) (Qty.2) 2.50
WF1032S   Water Fitting Short, #10-32 Thread, 3/8" Long, (Brass) (Qty.2) 2.50
         
WOSM-B   Water Outlet, Surface Mount (Brass)   2.50
WOSM-N   Water Outlet, Surface Mount (Nickel Plated Brass)   3.00
WOSM-S   Water Outlet, Surface Mount (Stainless Steel)   3.00
         
WPB   Water Pickup Bracket, Holds & Positions 1 or 2 Threaded water Pickups   3.50
WPCA 1100 Clamping Water Pickup Assembly   7.50
WPCA-2   Dual Clamping Water Pickup Assembly   14.75
WPSM   Surface Mount Water Pickup, mounts through hull or trim tab (Brass)   3.50
WPT-CS   Water Pickup Tube, 3/16" O.D. x 3 1/2" Long, Curved, fits clamp bracket   3.50
WPT-CT 1101 Water Pickup Tube, 3/16" O.D. x 3 1/2" Long, Curved, Thd. 10-32 x 2", w/2 nuts   4.50
         
DOUBLE SKEGS (TURN FINS)
TFDS106 1000 Double Skeg Turn Fin - Small (1 3/8" deep)   9.50
TFDS110 1001 Double Skeg Turn Fin - Large (1 5/8" deep)   9.50
         
ALUMINUM CONTROL ARMS
CA10-6 1016, 131 1.0" Long Control Arm for 3/16" Diameter Shaft   3.75
CA10-8   1.0" Long Control Arm for 1/4" Diameter Shaft   3.75
CA15-6 1017, 1315 1.5" Long Control Arm for 3/16" Diameter Shaft   3.75
CA15-8   1.5" Long Control Arm for 1/4" Diameter Shaft   3.75
         
MOTOR MOUNTS WITH MOUNTING PLATES AND HARDWARE
MMF421 1004 4" Rails, F/.21 Motor, 1 3/16" Opening   9.50
MMF440 1005 4" Rails, F/.40 Motor, 1 5/16" Opening   9.50
MMF540 1006 5" Rails, F/.40 Motor, 1 5/16" Opening   9.50
MMF560 1007 5" Rails, F/.60 Motor, 1 3/4" Opening   9.50
         
MMI-4060A 1008 Assy.- QC Quick Change Mt. 5" W/.40 &.60 Inserts, 1 5/16" & 1 3/4" Opening   23.75
MMI-40A   Assy.- QC Quick Change Mt. 5" W/.40 Insert, 1 5/16" Opening   19.75
MMI-60A   Assy.- QC Quick Change Mt. 5" W/.60 Insert, 1 3/4" Opening   19.75
MMIB 1009 Assy.- QC Master Mount W/1212 Mounting Plates   14.75
MMI-40 1010 QC40 Insert Adapter .40 Motor, 1 5/16" Opening   6.50
MMI-60 1011 QC60 Insert Adapter .60 Motor, 1 3/4" Opening   6.50
         
MMG-E01   Echo 21cc & 24cc Motor Mount for 5" rails, 7/8" Bore (GT)   34.75
MMG-E02   Echo 21cc & 24cc Motor Mount for 5" rails, 1" Bore (Straight Shaft)   34.75
MMG-H01   Homelite 25 & 30cc Universal Motor Mount for 5" rails, Direct Drive or Clutch   34.75
MMG-H02   Homelite 25 & 30cc Engines with Clutch, Compact, Motor Mount for 5" rails   34.75
MMG-M2501   McCulloch 21 & 25cc Engines, Motor Mount Offset for 5" rails, 7/8" Bore   34.75
MMG-M2502   McCulloch 21 & 25cc Engines, Motor Mount Offset for 5" rails, 1" Bore (Straight Shaft)   34.75
MMG-Z2301   Zenoah G-23 Motor Mount for 5" rails   64.75
MMG-Z23CL   Zenoah G-23 Motor Mount and Clutch for 5" rails   179.75
MMG-Z4201   Zenoah G-42 Motor Mount for 5" rails - Only available with purchase of engine   99.75
         
MMG-U1   Motor Mount Kit for Gas Engine, Universal, Fits 5" Rails, 1" Tall Angle, 2 Kits Required   14.75
MMG-U2   Motor Mount Kit for Gas Engine, Universal, Fits 5" Rails, 2" Tall Angle, 2 Kits Required   14.75
MMG-U3   Motor Mount Kit for Gas Engine, Universal, Fits 5" Rails, 3" Tall Angle, 2 Kits Required   14.75
         
MMG-ISOL-08   Rubber Isolator, 3/4" O.D. x 1/2" High, Male x Female 1/4"-20 UNC   4.50
MMG-ISOL-10   Rubber Isolator, 3/4" O.D. x 5/8" High, Male x Female 1/4"-20 UNC   4.50
MMG-ISOL-K08   Set of 4 Rubber Isolators, 3/4" O.D. x 1/2" High, Male x Female 1/4"-20 UNC & Stainless Steel Hardware   14.75
MMG-ISOL-K10   Set of 4 Rubber Isolators, 3/4" O.D. x 5/8" High, Male x Female 1/4"-20 UNC & Stainless Steel Hardware   14.75
MMG-ISOPR-K08   Set of Four Rubber Isolators (1/2" tall) and Perch Brackets, Includes Stainless Steel Hardware   24.75
MMG-ISOPR-K10   Set of Four Rubber Isolators (5/8" tall) and Perch Brackets, Includes Stainless Steel Hardware   24.75
MMG-PERCH-1   Perch / Angle Bracket, 1" tall, for Gasoline Motor Mounts and Other (Qty. 2) 6.50
MMG-PERCH-2   Perch / Angle Bracket, 2" tall, for Gasoline Motor Mounts and Other (Qty. 2) 7.50
         
BRACKETS
BR1219 1219 Pivot Bracket for Straight Rudder   3.50
BR1220 1220 Pivot Bracket for 410 and 502 Rudders   3.50
BR1221 1221 Tee Bracket   4.50
BR1222 1222 HBR Master Bracket   19.75
BR1222C   HBR Master Bracket, Center Pull Option for Reduced Transom Height   24.75
BR1223 1223 HBR Pivot Bracket, 'C' Shaped   4.50
BR1223M   HBR Pivot Bracket, 'C' Shaped, Milled and Taped to Mount to Transom   8.50
BR1224 1224 VOA Master Bracket   14.75
BR1244 1244 Strut Mounting Bracket for placing Full Range Strut through the hull   6.50
         
MOUNTING & RETAINER PLATES
MP1211 1211 RT-4, 2 Hole, Retainer Plate used with 4" Motor Mounts   2.50
MP1212 1212 RT-5, 4 Hole, Retainer Plate used with 5" Motor Mounts and HBR   2.50
MP1213 1213 1MP Mounting Plate   3.50
MP1214 1214 2/3 MP Mounting Plate   3.50
MP1215 1215 T Mounting Plate   4.50
MP1216 1216 VOA Mounting Plate   4.50
         
SHAFT LOGS - STRAIGHT
SL5-12 1117 Shaft Log for 5/32" Cable, 3/16" I.D. x 1/4" O.D. x 12" Long, Straight   6.50
SL5-18 1118 Shaft Log for 5/32" Cable, 3/16" I.D. x 1/4" O.D. x 18" Long, Straight   9.50
         
SL6-12 1119 Shaft Log for 3/16" Cable, 7/32" I.D. x 9/32" O.D. x 12" Long, Straight   8.50
SL6-18 1120 Shaft Log for 3/16" Cable, 7/32" I.D. x 9/32" O.D. x 18" Long, Straight   10.75
         
SHAFT LOGS WITH S-BEND
SLB5-8 1125 SL 1-08 Shaft Log for 5/32" Cable, 8" Long, 3/16" I.D. x 1/4" O.D., S-Bend   5.00
SLB5-10 1126 SL 1-10 Shaft Log for 5/32" Cable, 10" Long, 3/16" I.D. x 1/4" O.D., S-Bend   5.50
SLB5-12 1127 SL 1-12 Shaft Log for 5/32" Cable, 12" Long, 3/16" I.D. x 1/4" O.D., S-Bend   6.50
SLB5-14 1128 SL 1-14 Shaft Log for 5/32" Cable, 14" Long, 3/16" I.D. x 1/4" O.D., S-Bend   7.00
SLB5-16 1129 SL 1-16 Shaft Log for 5/32" Cable, 16" Long, 3/16" I.D. x 1/4" O.D., S-Bend   7.50
SLB5-18 1130 SL 1-18 Shaft Log for 5/32" Cable, 18" Long, 3/16" I.D. x 1/4" O.D., S-Bend   8.50
         
SLB6-8 1133 SL 2-08 Shaft Log for 3/16" Cable, 8" Long, 7/32" I.D. x 9/32" O.D., S-Bend   6.50
SLB6-10 1134 SL 2-10 Shaft Log for 3/16" Cable, 10" Long, 7/32" I.D. x 9/32" O.D., S-Bend   7.00
SLB6-12 1135 SL 2-12 Shaft Log for 3/16" Cable, 12" Long, 7/32" I.D. x 9/32" O.D., S-Bend   7.50
SLB6-14 1136