Product Index
Page: 1 2 3 4

EC-SFN-CA5   Super Flywheel Nut Cable Adapter for 5/32" cable
GE-STAGE3   Super Pro Modified engine, Unlimited CALL FOR PRICING
WPSM   Surface Mount Water Pickup, mounts through hull or trim tab (brass)
MP1215   T mounting plate
EA-TACH   Tachometer, records maximum RPM, run time, hour meter, inductive pickup
BR1221   Tee Bracket
B-TSB6-08-12   Teflon flange bearing 3/16" I.D. x 1/4" O.D. x 3/8" long (qty 2)
B-TFB6-10-16   Teflon flange bearing 3/16" I.D. x 5/16" O.D. x 1/2" long (qty 2)
B-TFB7-10-16   Teflon flange bearing 7/32" I.D. x 5/16" O.D. x 1/2" long (qty 2)
B-TSB7-10-12   Teflon flange bearing 7/32" I.D. x 5/16" O.D. x 3/8" long (qty 2)
B-TTW6-12-2   Teflon thrust washer 3/16" I.D. x 3/8" O.D. x 1/16" thick (qty 2)
B-TTW6-14-2   Teflon thrust washer 3/16" I.D. x 7/16" O.D. x 1/16" thick (qty 2)
STK-TT8   Teflon tubing for 1/4"" diameter flex cable, fits 11/32" O.D. x 5/15" I.D. tube, (price per foot), not recommended
STK-TT6   Teflon tubing for 3/16" diameter flex cable, fits 9/32" O.D. x 1/4" I.D. tube, (price per foot), not recommended
EA-TCKHOM   Throttle cable kit for stock Homelite
EA-TCKSP   Throttle cable kit for straight pull linkage, can also be used on WYK barrel carbs.
EA-TCKWAL   Throttle cable kit for Walbro butterfly style carburetors with primer bulb.
EA-Z23-P28   Thrust washer for 8mm wrist pin, for Zenoah G-23, G-2D or LH and 25.6cc, (qty 2)
EA-Z42-P28   Thrust washer for wrist pin, for Zenoah G-42, (qty 2)
RA-TORS   Torsion Spring for Safety Shear Rudder (Stainless Steel)
EA-Z23TPS3-CW   TPS3 tuned chamber, stamped halves, TIG welded together
EA-Z23TPS3-CU   TPS3 tuned chamber, stamped halves, un-welded
BS-TAB108   trim tab, 1 1/2" wide x 1 3/4" long, adjustable turnbuckle, (plastic)
BS-TAB200   trim tab, 2" wide x 3" long, adjustable turnbuckle, (stainless steel)
H-TPSMS06-12   Truss head phillips sheet metal screw, #6 x 3/4" long stainless steel (QTY 5)
H-TPSMS-06-06   Truss head phillips sheet metal screw, #6 x 3/8" long stainless steel (QTY 5)
H-TPSMS06-10   Truss head phillips sheet metal screw, #6 x 5/8" long stainless steel (QTY 5)
EA-Z23TPA-C   Tuned pipe chamber for G-23, (Aluminum), using O-Ring style header, Use EA-TPA-C0, EA-TPA-C1 or EA-TPA-C3
EA-Z23TPAW-C   Tuned pipe chamber for G-23, using wet style header, (Aluminum), Use EA-TPA-C0, EA-TPA-C1 or EA-TPA-C3
EA-TPA-C0   Tuned pipe chamber, aluminum, 0" band, 7/8" O.D. inlet, 2 1/4" O.D. belly, 16 7/8" long, 1/2" O.D. stinger
EA-TPA-C1   Tuned pipe chamber, aluminum, 1" band, 7/8" O.D. inlet, 2 1/4" O.D. belly, 17 1/2" long, 1/2" O.D. stinger
EA-TPA-C2   Tuned pipe chamber, aluminum, 2" band, 7/8" O.D. inlet, 2 1/4" O.D. belly, 18 1/2" long, 1/2" O.D. stinger
EA-TPC22   Tuned pipe coupler, Silicone, 11/16" I.D. x 1 1/2" long (used with 7/8" header tubes)
EA-TPC20   Tuned pipe coupler, Silicone, 5/8" I.D. x 1 1/2" long
EA-TPC14   Tuned pipe coupler, Silicone, 7/16" I.D. x 1 1/2" long
EA-Z23TPS3   Tuned pipe for G-23, max power dry system, exhaust flange, expansion chamber & silencer, (nickel plated steel)
EA-Z42TPS3   Tuned pipe for G-42, exhaust flange, header pipe & expansion chamber, silencer, (steel)
EA-TPSIL   Tuned pipe silencer for Stinger OD's of 1/2" (Aluminum)
EA-Z23TPA3   Tuned pipe system for G-23, O-Ring style, water cooled, (Aluminum), 90 degree forward then 180 degree to rear, 0" offset
EA-Z23TPA3-3   Tuned pipe system for G-23, O-Ring style, water cooled, (Aluminum), 90 degree forward then 180 degree to rear, 3" offset
EA-Z23TPA2L   Tuned pipe system for G-23, O-Ring style, water cooled, (Aluminum), 90 degree to rear, long radius
EA-Z23TPA2S   Tuned pipe system for G-23, O-Ring style, water cooled, (Aluminum), 90 degree to rear, short radius
EA-Z23TPA1   Tuned pipe system for G-23, O-Ring style, water cooled, (Aluminum), wrap to center
EA-Z23TPAW   Tuned pipe system for G-23, wet style water cooled, (Aluminum), 90 degree forward then 180 degree to rear
BS-TT2   Tygon tubing, 1/8" I.D. yellow, 3 feet long, used for gasoline fuel lines and water lines
BS-SM   Universal Kwik-switch mount (for receiver switch)
EA-Z23IMSP1-U   Upgrade to straight pull intake manifold (with engine purchase), carburetor conversion and throttle linkage kit
SHIPPING PRICE   US shipping and handling
EA-Z42-P09   Use EA-Z23-P09 screws for cylinder, socket head cap screw, 5-.80 x 20mm long, with washers
BS-TV2   Vinyl tubing, 1/8" I.D. clear, 5 feet long, used for water lines only
SBHP-6S   VOA Hydroplane strut, with 3/16" sleeve bearings
BR1224   VOA Master Bracket
SBMP-6S   VOA Monoplane strut, with 3/16" sleeve bearings
MP1216   VOA mounting plate
VOA304HP   VOA-19H Variable outdrive assy, 3 1/4" long rudder (.21 size Hydro)
VOA304MP   VOA-19M Variable outdrive assy, 3 1/4" long rudder (.21 size Mono)
RBT304   VOA-1RB, Rudder Blade, 3 1/4" long (.21 size)
RBT312   VOA-2RB, Rudder Blade, 3 3/4" long (.40 size)
VOA312HP   VOA-40H Variable outdrive assy, 3 3/4" long rudder (.40 size Hydro)
VOA312MP   VOA-40M Variable outdrive assy, 3 3/4" long rudder (.40 size Mono)
EA-WALC363   Walbro carburetor WT363, fits stock homelite, has choke
EA-WALC33   Walbro carburetor WYK33, rotary barrel style, 15mm bore
EA-WAL-JETK   Walbro jet kit for rotary barrel carburetor
EA-Z26EXH-QD   Water cooled exhaust manifold for J&G cylinder to Quickdraw tuned pipe
WF1032L   Water Fitting Long, #10-32 Thread, 1/2" long, (Brass)
WF1032S   Water Fitting Short, #10-32 Thread, 3/8" long, (Brass)
WF0832   Water Fitting, #8-32 Thread, 3/8" long, (Brass)
EA-Z23-P05   Water jacket seal kit for Zenoah G-23 or G-2D, includes large and small O-Ring seals & screws
EA-Z23-P03   Water jacket, for Zenoah G-23 or G-2D, signature series, anodized colors
WOSM-B   Water Outlet, Surface Mount (brass)
WOSM-N   Water Outlet, Surface Mount (nickel plated brass)
WOSM-S   Water Outlet, Surface Mount (stainless steel)
WPB   Water Pickup Bracket, holds and postion 1 or 2 threaded water pickups
Note-W1   Water Pickup Options: SWP (side water pickup) add $10.00 each rudder
WPT-CS   Water Pickup Tube, 3/16" O.D. x 3 1/2" long, curved, fits clamp bracket
WPT-CT   Water Pickup Tube, 3/16" O.D. x 3 1/2" long, curved, thread #10-32 x 2", with 2 nuts
Note-W2   Water Pickup/Bilge Options: SWP (side water pickup), BWP (bottom water pickup), BIL (bilge) add $10.00 each rudder
EA-WALWP03   Water pump, modified, 1/8" brass hose fittings, Aluminum mounting bracket, stainless steel hardware
EA-WALWP01   Water pump, stock, 1/4" hose fittings
BS-ANT   water tight car and boat antenna
EA-Z23-P27   Wrist pin bearing for 8mm wrist pin,for Zenoah G-23, G-2D or LH and 25.6cc
EA-Z42-P27   Wrist pin bearing for Zenoah G-42
EA-Z26-P25   Wrist pin for 25.6cc Zenoah, (8mm O.D.)
EA-Z23-P25   Wrist pin, for Zenoah G-23, G-2D or LH, 26mm long x 8mm O.D.)
EA-Z42-P25   Wrist pin, for Zenoah G-42
GE-Z1026-1   Zenoah 26cc Stock engine
GE-Z23-M   Zenoah G-23 compact, modifications, options and packages, Call for information
GE-Z23-1   Zenoah G-23 compact, stage 1, no mounts, no clutch, no pipe
GE-Z23-1MC   Zenoah G-23 compact, stage 1, with pro mounts and round collet drive, no clutch, no pipe
GE-Z23-1MS   Zenoah G-23 compact, stage 1, with pro mounts and square drive, no clutch, no pipe
GE-Z23-1CS   Zenoah G-23 compact, stage 1, with pro mounts, square drive and clutch, no pipe
GE-Z23-1MC-SP   Zenoah G-23 compact, stage 1, with straight pull intake, Big Bore Carb, pro mounts and square drive, no clutch, no pipe
GE-Z23-1MS-SP   Zenoah G-23 compact, stage 1, with straight pull intake, Big Bore Carb, pro mounts and square drive, no clutch, no pipe
GE-Z23-1CS-SP   Zenoah G-23 compact, stage 1, with straight pull intake, Big Bore Carb, pro mounts, square drive and clutch, no pipe
GE-Z23-2   Zenoah G-23 compact, stage 2, no mounts, no clutch, no pipe
GE-Z23-2MC   Zenoah G-23 compact, stage 2, with pro mounts and round collet drive, no clutch, no pipe
GE-Z23-2MS   Zenoah G-23 compact, stage 2, with pro mounts and square drive, no clutch, no pipe
GE-Z23-2CS   Zenoah G-23 compact, stage 2, with pro mounts, square drive and clutch, no pipe
GE-Z23-2MC-SP   Zenoah G-23 compact, stage 2, with straight pull intake, Big Bore Carb, pro mounts and square drive, no clutch, no pipe
GE-Z23-2MS-SP   Zenoah G-23 compact, stage 2, with straight pull intake, Big Bore Carb, pro mounts and square drive, no clutch, no pipe
GE-Z23-2CS-SP   Zenoah G-23 compact, stage 2, with straight pull intake, Big Bore Carb, pro mounts, square drive and clutch, no pipe
GE-Z23-S   Zenoah G-23 compact, stock, no mounts, no clutch, no pipe
GE-Z23-SMC   Zenoah G-23 compact, stock, with pro mounts and round collet drive, no clutch, no pipe
GE-Z23-SMS   Zenoah G-23 compact, stock, with pro mounts and square drive, no clutch, no pipe
GE-Z23-SCS   Zenoah G-23 compact, stock, with pro mounts, square drive and clutch, no pipe
GE-Z23-SMC-SP   Zenoah G-23 compact, stock, with straight pull intake, Big Bore Carb, pro mounts and round collet drive, no clutch, no pipe
GE-Z23-SMS-SP   Zenoah G-23 compact, stock, with straight pull intake, Big Bore Carb, pro mounts and square drive, no clutch, no pipe
GE-Z23-SCS-SP   Zenoah G-23 compact, stock, with straight pull intake, Big Bore Carb, pro mounts, square drive and clutch, no pipe
EA-Z23EPG-SC   Zenoah G-23 Exhaust port girdle and super cool water jacket
MMG-Z23CL   Zenoah G-23 Motor Mount and Clutch for 5" rails
MMG-Z2301   Zenoah G-23 Motor Mount for 5" rails
EA-Z23STRTKIT   Zenoah G-23 starter rebuild kit, engagement dog & high strength abrasion resistant cord
EA-TPA-M-Z23   Zenoah G-23, O-ring style water cooled manifold, for flanged header pipes, 7/8" diameter, use EA-Z23TPA-M
EA-TPAW-M-Z23   Zenoah G-23, Wet style water cooled manifold/header, deep-V, use EA-Z23TPAW-M
EA-TPA-H1-Z23   Zenoah G-23, Header pipe (Aluminum), Wrap to center, 7/8" diameter, use with O-ring style manifold
EA-Z2D-P34   Zenoah G-2D or Quickdraw, pull starter, complete
GE-Z2D-70   Zenoah G-2D, air cooled, factory modified (2.25 horsepower), with canister muffler, no mounts, no clutch
GE-Z42M   Zenoah G-42 Dominator, Modifications, Options and Packages, Call for Information
GE-Z42-1CS-SP   Zenoah G-42 Dominator, Stage 1 Mods, straight pull, clutch, tuned pipe (nickel plated steel), pro mounts, square drive
GE-Z42-1MC-SP   Zenoah G-42 Dominator, Stage 1 Mods, straight pull, tuned pipe (nickel plated steel), pro mounts, round collet drive
GE-Z42-1MS-SP   Zenoah G-42 Dominator, Stage 1 Mods, straight pull, tuned pipe (nickel plated steel), pro mounts, square drive
GE-Z42-2CS-SP   Zenoah G-42 Dominator, Stage 2 Mods, straight pull, clutch, tuned pipe (nickel plated steel), pro mounts, square drive
GE-Z42-2MC-SP   Zenoah G-42 Dominator, Stage 2 Mods, straight pull, tuned pipe (nickel plated steel), pro mounts, round collet drive
GE-Z42-2MS-SP   Zenoah G-42 Dominator, Stage 2 Mods, straight pull, tuned pipe (nickel plated steel), pro mounts, square drive
GE-Z42-SNN-SP   Zenoah G-42 Dominator, Stock, straight pull, no mounts no clutch, no pipe
MMG-Z4201   Zenoah G-42 Motor Mount for 5" rails, Only available with purchase of engine

Page: 1 2 3 4