Product Index
Page: 1 2 3 4

SBP100-6S   Parallel, 1" drop, with 3/16" sleeve bearings
MMG-PERCH-1   Perch/Angle Bracket, 1" tall, for Gasoline Motor Mounts and Other
MMG-PERCH-2   Perch/Angle Bracket, 2" tall, for Gasoline Motor Mounts and Other
EA-Z26-P23   Piston for 25.6cc Zenoah cylinder (takes 8mm wrist pin and thin piston rings
EA-Z23-P23-K   Piston kit, Includes: Double ring piston, piston rings, wrist pin and cir clips for Zenoah G-23, G-2D or LH
EA-Z23-P24-1   Piston ring, for Zenoah G-23, G-2D or LH, 1.43mm thick (qty 1)
EA-Z26-P24   Piston rings for 25.6cc Zenoah, thin (qty 2)
EA-Z23-P24   Piston rings, for Zenoah G-23, G-2D or LH, 1.43mm thick (qty 2)
EA-Z42-P24   Piston rings, for Zenoah G-42, (qty 2)
EA-Z23-P63   Piston stop tool, holds crankshaft while tightening and loosening nuts and collets, fits G-23 and most others
EA-Z23-P23   Piston, for Zenoah G-23, G-2D or LH (double ring)
EA-Z23-P23-1   Piston, for Zenoah G-23, G-2D or LH (single ring)
EA-Z42-P23   Piston, for Zenoah G-42
BR1220   Pivot Bracket for 410 and 502 Rudders
BR1219   Pivot Bracket for Straight Rudder
PP101   Pivot pin 1/8" O.D. x 1 1/16" long, stainless steel
PP104   Pivot pin 3/16" O.D. x 1 1/4" long, stainless steel
PP110   Pivot pin 3/16" O.D. x 1 5/8" long, stainless steel
PP204   Pivot pin 3/16" O.D. x 2 1/4" long, stainless steel
EA-Z26-P11-PB   Plastic insulator block/intake manifold for J&G 22.5cc or 25.6cc top end, for butterfly style carburetor
EA-Z26-P11-PR   Plastic insulator block/intake manifold for J&G 22.5cc or 25.6cc top end, for rotary barrel style carburetor
EA-Z23-P30   Plate mount, for Zenoah G-23
VINYL COLORS-1   Please specify color desired for vinyl graphics: BK-black, WT-white, RD-red, BU-marine pearl blue
GE-PT   Pressure Tap Option, for 1/8" hose to connect to pulse pump, maching and installation on modified motor
GE-PTS   Pressure Tap Option, for 1/8" hose to connect to pulse pump, machining and installation on stock motor
EA-WAL-PRIM   Primer bulb for Walbro carburetors
GE-STAGE2   Pro Modified engine, Increased compression, Increased exhaust, intake and transfer porting
EA-H25-P02-1K   Pro modified water cooled Homelite 25cc cylinder with billet A1 water jacket, Anodized colors available
EA-H25-PPCK   Pro power kit f/25cc Homelite, cylinder, billet A1 water jacket, Straight pull intake, big bore carburetor, throttle linkage
H-PN06   Prop nut #6-32 flanged shakeproof (qty 2)
H-PN08   Prop nut #8-32 flanged shakeproof (qty 2)
H-PN-4   Prop nut 1/4"-28 flanged shakeproof (qty 2)
H-PN-3   Prop nut 10-32 flanged shakeproof (qty 2)
PR-ADAP   Propeller adapter to run 1/4" bore prop on 3/16" O.D. prop shaft
EA-Z23-P33   Pulley, 2 lug stock, for Zenoah G-23
EA-Z42-P33   Pulley, 2 lug stock, for Zenoah G-42
BS-PS   Push rod seals with mounting hardware, use with #2-56 or #4-40 push rods
MMI-40   QC40 Insert Adapter .40 Motor 1 5/16" opening
MMI-60   QC40 Insert Adapter .60 Motor 1 3/4" opening
RS-BP72-CHRG   Quick charger for 7.2 volt battery pack, works from AC or DC power source
EA-Z23-P33-4   Quick engagement 4 tooth starter lug for Zenoah G-23, threads to crankshaft
EA-Z23TPS1-JG   Quickdraw steel tuned pipe for Zenoah G-23 with J&G Top End
EA-Z23TPS1-QD   Quickdraw steel tuned pipe for Zenoah G-23, includes water cooled manifold (aluminum)
BS-RB-GASKET   Radio box gasket, fits radio boxes 01, 02, 03 and 04
BS-RB03   Radio box, basic f/7.2Volt, fits 5" rails, waterproof, gasket, clear lid, servo tray, SS hardware
BS-RB01   Radio box, basic, fits 5" rails, waterproof, gasket, clear lid, servo tray, SS hardware
BS-RB04   Radio box, delux f/7.2Volt, fits 5" rails, as above plus: pushrod seals, waterproof switch mount and antenna
BS-RB02   Radio box, delux, fits 5" rails, as above plus: pushrod seals, waterproof switch mount and antenna
SK-DUM007   RBFT410-SWP rudder, pivot bracket, SS pivot pin, nylon flange bushings
SK-DUM008   RBFT502-SWP rudder, pivot bracket, SS pivot pin, nylon flange bushings
RS-RC   Receiver connector for battery supply, large wires, Futuba 'J' style connection
EA-Z23-P34   Recoil starter assembly complete, for Zenoah G-23 or LH
EA-Z42-P34   Recoil starter assembly complete, for Zenoah G-42
EA-SP-BMR7A   Resistor spark plug, BMR7A, Zenoah, (washer)
EA-SP-RCJ4   Resistor spark plug, RCJ4, Fits all popular gas engines, Zenoah, extremely cold, (washer)
EA-SP-RCJ6Y   Resistor spark plug, RCJ6Y, Fits all popular gas engines, cold, extended electrode, (washer)
EA-SP-RCJ8   Resistor spark plug, RCJ8, Fits all popular gas engines, (washer)
EA-SP-RDJ7Y   Resistor spark plug, RDJ7Y, Homelite, extended electrode, (taper)
EA-SP-RDJ8J   Resistor spark plug, RDJ8J, McCulloch, extended electrode, (taper)
EA-WAL-ROTBAR   Rotary barrel replacement subassembly for Walbro WYK33 carburetor
MP1211   RT-4, 2 hole, retainer plate used with 4" motor mounts
MP1212   RT-5, 4 hole, retainer plate used with 5" motor mounts and HBR
MMG-ISOL-08   Rubber Isolaters, 3/4" O.D. x 1/2" high, Male x Female 1/4"-20 UNC
MMG-ISOL-10   Rubber Isolaters, 3/4" O.D. x 5/8" high, Male x Female 1/4"-20 UNC
SK-CBG010   Running hardware kit for gas cracker box
RBTS410-BIL   Safety Shear Rudder with bilge, 4 5/8" long (.40 size), assy with head
RBTS502-BIL   Safety Shear Rudder with bilge, 5 1/8" long (.60 size), assy with head
RBTS410-BWP   Safety Shear Rudder with bottom water pickup, 4 5/8" long (.40 size), assy with head
RBTS502-BWP   Safety Shear Rudder with bottom water pickup, 5 1/8" long (.60 size), assy with head
RBTS410-SWP   Safety Shear Rudder with side water pickup, 4 5/8" long (.40 size), assy with head
RBTS502-SWP   Safety Shear Rudder with side water pickup, 5 1/8" long (.60 size), assy with head
RBTS410   Safety Shear Rudder, 4 5/8" long (.40 size), assy with head
RBTS502   Safety Shear Rudder, 5 1/8" long (.60 size), assy with head
RBTSC502   Safety Shear Rudder, Centerpull, 5 1/8"long, (.60 size) assy with head and arm
RBTSC410   Safety Shear Rudder, Centerpull, 4 5/8"long, (.40 size) assy with head and arm
RBTSC410-BIL   Safety Shear Rudder, Centerpull, with bilge, 4 5/8"long, (.40 size), assy with head and arm
RBTSC502-BIL   Safety Shear Rudder, Centerpull, with bilge, 5 1/8"long, (.60 size) assy with head and arm
RBTSC410-BWP   Safety Shear Rudder, Centerpull, with bottom water pickup, 4 5/8"long, assy with head and arm
RBTSC502-BWP   Safety Shear Rudder, Centerpull, with bottom water pickup, 5 1/8"long, assy with head and arm
RBTSC410-SWP   Safety Shear Rudder, Centerpull, with side water pickup 4 5/8"long, assy with head and arm
RBTSC502-SWP   Safety Shear Rudder, Centerpull, with side water pickup, 5 1/8"long, assy with head and arm
RATS410   Safety Shear Tapered Rudder Assy 4 5/8" long
RATS410-BIL   Safety Shear Tapered Rudder Assy 4 5/8" long, with bilge
RATS410-BWP   Safety Shear Tapered Rudder Assy 4 5/8" long, with bottom water pickup
RATS410-SWP   Safety Shear Tapered Rudder Assy 4 5/8" long, with side water pickup
RATS502-BIL   Safety Shear Tapered Rudder Assy 5 1/8" long, with bilge
RATS502-BWP   Safety Shear Tapered Rudder Assy 5 1/8" long, with bottom water pickup
RATS502-SWP   Safety Shear Tapered Rudder Assy 5 1/8" long, with side water pickup
RATS502   Safety Shear Tapered Rudder Assy 5/1/8" long
RATSC410   Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" long
RATSC410-BIL   Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" long, with bilge
RATSC410-BWP   Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" long, with bottom water pickup
RATSC410-SWP   Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" long, with side water pickup
RATSC502-BIL   Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" long, with bilge
RATSC502-BWP   Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" long, with bottom water pickup
RATSC502-SWP   Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" long, with side water pickup
RATSC502   Safety Shear Tapered Rudder Assy, Centerpull, 5/1/8" long
EA-Z23-P47   Screw for carburetor to insulator, 5-.80 x 50mm long with spacer washer, for Zenoah G-23 w/o aÉ
EA-Z23-P53   Screw for insulator block to cylinder, 5-.80 x 20mm long, for Zenoah G-23 (qty 2)
EA-Z23-P45   Screw for source coil, 4-.70 x 22mm long, for Zenoah G-23, (qty 20
EA-Z23-P35   Screw for starter or ignition coil, 4-.70 x 14mm long, for Zenoah G-23, (qty 4)
EA-Z23-P31   Screw, flat head, 5-.80 x 16mm long, for Zenoah G-23, (qty 3)
EA-Z23-P09   Screws for cylinder, socket head cap screw, 5-.80 x 20mm long, with washers, for Zenoah G-23, G-2D or G-42
EA-Z23-P46   See EA-SP-RCJ4
EA-Z23-P52   See EA-WALC67
EA-Z23-P06   See EA-Z23-P05
EA-Z23-P21   See EA-Z23-P17
EA-Z23-P41   See EA-Z23-P35
EA-Z23-P07   See H-SHC3M-8 or EA-Z23_P05
EA-Z23-P04   See WF1032L
RS-SYH   Servo 'Y' harness for 2 servos on one channel, generic 'S' style connectors
RS-SEJ   Servo extension with Futaba 'J' style connectors
MMG-ISOPR-K08   Set of 4 Rubber Isolaters (1/2" tall) and Perch Brackets, Includes Stainless Steel Hardware
MMG-ISOPR-K10   Set of 4 Rubber Isolaters (5/8" tall) and Perch Brackets, Includes Stainless Steel Hardware
MMG-ISOL-K08   Set of 4 Rubber Isolaters, 3/4" O.D. x 1/2" high, Male x Female 1/4"-20 UNC & Stainless Steel Hardware
MMG-ISOL-K10   Set of 4 Rubber Isolaters, 3/4" O.D. x 5/8" high, Male x Female 1/4"-20 UNC & Stainless Steel Hardware
H-SS08-04CS   Set screws, #8-32 x 1/4" long, carbon steel (QTY 10)
H-SS08-04SS   Set screws, #8-32 x 1/4" long, stainless steel (QTY 10)
H-SS08-02CS   Set screws, #8-32 x 1/8" long, carbon steel (QTY 10)
H-SS08-02SS   Set screws, #8-32 x 1/8" long, stainless steel (QTY 10)
H-SS08-03CS   Set screws, #8-32 x 3/16" long, carbon steel (QTY 10)
H-SS08-03SS   Set screws, #8-32 x 3/16" long, stainless steel (QTY 10)
SL6-12   Shaft Log for 3/16" cable, 7/32" I.D. x 9/32" O.D. x 12" long, straight
SL6-18   Shaft Log for 3/16" cable, 7/32" I.D. x 9/32" O.D. x 18" long, straight
SL5-12   Shaft Log for 5/32" cable, 3/16" I.D. x 1/4" O.D. x 12" long, straight
SL5-18   Shaft Log for 5/32" cable, 3/16" I.D. x 1/4" O.D. x 18" long, straight
RA-SPIN   Shear Pins for Safety Shear Rudder (Qty 6)
EA-Z23-P37   Shim for crankshaft, for Zenoah G-23
BS-TS2   Silicone tubing, 1/8" I.D. blue, 3 feet long, used for alcohol (glow) fuel lines and water lines
SLB5-8   SL 1-08 shaft log for 5/32" cable, 8" long, 3/16" I.D. x 1/4" O.D., S-Bend
SLB5-10   SL 1-10 shaft log for 5/32" cable, 10" long, 3/16" I.D. x 1/4" O.D., S-Bend
SLB5-12   SL 1-12 shaft log for 5/32" cable, 12" long, 3/16" I.D. x 1/4" O.D., S-Bend
SLB5-14   SL 1-14 shaft log for 5/32" cable, 14" long, 3/16" I.D. x 1/4" O.D., S-Bend
SLB5-16   SL 1-16 shaft log for 5/32" cable, 16" long, 3/16" I.D. x 1/4" O.D., S-Bend
SLB5-18   SL 1-18 shaft log for 5/32" cable, 18" long, 3/16" I.D. x 1/4" O.D., S-Bend
SLB6-8   SL 2-08 shaft log for 3/16" cable, 8" long, 7/32" I.D. x 9/32" O.D., S-Bend
SLB6-10   SL 2-10 shaft log for 3/16" cable, 10" long, 7/32" I.D. x 9/32" O.D., S-Bend
SLB6-12   SL 2-12 shaft log for 3/16" cable, 12" long, 7/32" I.D. x 9/32" O.D., S-Bend
SLB6-14   SL 2-14 shaft log for 3/16" cable, 14" long, 7/32" I.D. x 9/32" O.D., S-Bend
SLB6-16   SL 2-16 shaft log for 3/16" cable, 16" long, 7/32" I.D. x 9/32" O.D., S-Bend
SLB6-18   SL 2-18 shaft log for 3/16" cable, 18" long, 7/32" I.D. x 9/32" O.D., S-Bend
EA-Z26SLEEVE   Sleeve for J&G 25.6cc cylinder (1.340 I.D. 1.4475 O.D.)
EA-WALC11   Small rotary barrel carburetor, Walbro WY-1-1, internal pulse, primer bulb, fits Zenoah G-2D
EA-Z23-P19   Snap ringCrankshaft bearing (6001) for Zenoah G-23, G-2D or LH
H-SHC02-08   Socket head cap screw, #2-56 x 1/2" long, stainless steel (QTY 5)
H-SHC02-10   Socket head cap screw, #2-56 x 5/8" long, stainless steel (QTY 5)
H-SHC04-08   Socket head cap screw, #4-40 x 1/2" long, stainless steel (QTY 5)
H-SHC04-06   Socket head cap screw, #4-40 x 3/8" long, stainless steel (QTY 5)
H-SHC05-10   Socket head cap screw, #4-40 x 5/8" long, stainless steel (QTY 5)
H-SHC06-06   Socket head cap screw, #6-32 x 3/8" long, stainless steel (QTY 5)
H-SHC08-24   Socket head cap screw, #8-32 x 1 1/2" long, stainless steel (QTY 5)
H-SHC08-20   Socket head cap screw, #8-32 x 1 1/4" long, stainless steel (QTY 5)
H-SHC08-16   Socket head cap screw, #8-32 x 1" long, stainless steel (QTY 5)
H-SHC08-08   Socket head cap screw, #8-32 x 1/2" long, stainless steel (QTY 5)
H-SHC08-12   Socket head cap screw, #8-32 x 3/4" long, stainless steel (QTY 5)
H-SHC08-10   Socket head cap screw, #8-32 x 5/8" long, stainless steel (QTY 5)
H-SHC08-14   Socket head cap screw, #8-32 x 7/8" long, stainless steel (QTY 5)
H-SHC-4-06   Socket head cap screw, 1/4"-20 x 3/8" long, stainless steel (QTY 5)
H-SHC3M-08   Socket head cap screw, 3-.50MM X 8MM long, stainless steel (QTY 2)
H-SHC5M-40   Socket head cap screw, 5-.80mm X 40mm long, stainless steel (QTY 2)
EA-Z23-P38   Source coil (gray), for Zenoah G-23
EA-Z23-P39   Source coil (red), for Zenoah G-23 & G-42
EA-Z23-P44   Spring for spark plug, for Zenoah G-23 and other
EC-SDA4-8   Square Drive Adapter, for 1/4"-28 thread X 1/4" square cable
EC-SDA4-6   Square Drive Adapter, for 1/4"-28 thread X 3/16" square cable
EC-SDA10M-8   Square Drive Adapter, for 10 x 1.0mm thread X 1/4" square cable
EC-SDA5-8   Square Drive Adapter, for 5/16"-24 thread X 1/4" square cable
EC-SDA5-6   Square Drive Adapter, for 5/16"-24 thread X 3/16" square cable
EC-SDA6M-8   Square Drive Adapter, for 6 x 1.0mm thread X 1/4" square cable
EC-SDA6M-6   Square Drive Adapter, for 6 x 1.0mm thread X 3/16" square cable
EC-SDA7M-8   Square Drive Adapter, for 7 x 1.0mm thread X 1/4" square cable
EC-SDA7M-6   Square Drive Adapter, for 7 x 1.0mm thread X 3/16" square cable
EC-SDA8M-8   Square Drive Adapter, for 8 x 1.25mm thread X 1/4" square cable
EC-SDA8M-6   Square Drive Adapter, for 8 x 1.25mm thread X 3/16" square cable
EC-SDA-Z23D   Square Drive Adapter, for Zenoah G-23 Compact x 1/4" square cable
ST-1   Stainless Nut
RS-SW1   Stock receiver battery switch, Futaba 'J' style connectors, with charging jack
RS-SW2   Stock receiver battery switch, generic 'S' style connectors
EA-H25-P02-K   Stock water cooled Homelite 25cc cylinder with billet A1 water jacket, Anodized colors available
EA-Z23IMSP1-A   Straight pull intake manifold, Big bore carburetor and throttle linkage for G-23
EA-HOMIMSP1-A   Straight pull intake manifold, big bore carburetor and throttle linkage for Homelite
EA-HOMIMSP1   Straight pull intake manifold, big bore, with screws and gasket for Homelite
EA-Z23IMSP1   Straight pull intake manifold, with screws and gasket for G-23
DH-STP8-14   Streamlined Tail Piece for 1/4" O.D. prop shaft (7/16" O.D.)
DH-STP6-12   Streamlined Tail Piece for 3/16" O.D. prop shaft (3/8" O.D.)
DH-STP6-14   Streamlined Tail Piece for 3/16" O.D. prop shaft (7/16" O.D.)
BR1244   Strut mounting bracket for placing full range strut through the hull
EA-Z42-P03   Super cooled water jacket for Zenoah G-42, Signature series, six anodized colors available
EC-SFN4-6   Super Flywheel Nut Assembly for 1/4"-28 thread x 3/16" cable
EC-SFN4-6KB   Super Flywheel Nut Assembly for 1/4"-28 thread x 3/16" cable (for K&B)
EC-SFN4-5   Super Flywheel Nut Assembly for 1/4"-28 thread x 5/32" cable
EC-SFN5M-6   Super Flywheel Nut Assembly for 5 x .80mm thread x 3/16" cable
EC-SFN5M-5   Super Flywheel Nut Assembly for 5 x .80mm thread x 5/32" cable
EC-SFN5-6   Super Flywheel Nut Assembly for 5/16"-24 thread x 3/16" cable
EC-SFN5-5   Super Flywheel Nut Assembly for 5/16"-24 thread x 5/32" cable
EC-SFN6M-6   Super Flywheel Nut Assembly for 6 x 1.0mm thread x 3/16" cable
EC-SFN6M-5   Super Flywheel Nut Assembly for 6 x 1.0mm thread x 5/32" cable
EC-SFN7M-6   Super Flywheel Nut Assembly for 7 x 1.0mm thread x 3/16" cable
EC-SFN7M-5   Super Flywheel Nut Assembly for 7 x 1.0mm thread x 5/32" cable
EC-SFN-CA6   Super Flywheel Nut Cable Adapter for 3/16" cable

Page: 1 2 3 4